dmesg - Intel Xeon E5-2690 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-279.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Thu Jun 21 07:08:44 CDT 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008dc00 (usable)
BIOS-e820: 000000000008dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007cc7e000 (usable)
BIOS-e820: 000000007cc7e000 - 000000007ccd9000 (reserved)
BIOS-e820: 000000007ccd9000 - 000000007cdf1000 (ACPI data)
BIOS-e820: 000000007cdf1000 - 000000007da17000 (ACPI NVS)
BIOS-e820: 000000007da17000 - 000000007eb0e000 (reserved)
BIOS-e820: 000000007eb0e000 - 000000007f000000 (ACPI NVS)
BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000001080000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF04C0
DMI: ASUSTeK COMPUTER INC. Z9PP-D24 Series/Z9PP-D24 Series, BIOS 5104 08/05/2013
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D7FFF write-protect
D8000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF000000000 write-back
1 base 001000000000 mask 3FFF80000000 write-back
2 base 000080000000 mask 3FFF80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 64GB, range: 2GB, type WB
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 65536M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 32GB, type WB
reg 5, base: 64GB, range: 2GB, type WB
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7cc7e max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007cc7e000
0000000000 - 0040000000 page 1G
0040000000 - 007cc00000 page 2M
007cc00000 - 007cc7e000 page 4k
kernel direct mapping tables up to 7cc7e000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000001080000000
0100000000 - 1080000000 page 1G
kernel direct mapping tables up to 1080000000 @ 12000-13000
RAMDISK: 3737e000 - 37fefd6c
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 000000007cd11090 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000007cd1e7a0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
ACPI: DSDT 000000007cd111c8 0D5D2 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 000000007da14f80 00040
ACPI: APIC 000000007cd1e8b0 00224 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000007cd1ead8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000007cd1eb20 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: DMAR 000000007cdf02b8 000E0 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: SRAT 000000007cd1ebb8 004B0 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 000000007cd1f068 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 000000007cd1f098 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: PRAD 000000007cd1f0d0 000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: SPMI 000000007cd1f190 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 000000007cd1f1d0 D0CB0 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: EINJ 000000007cdefe80 00130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 000000007cdeffb0 00230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 000000007cdf01e0 000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 000000007cdf0288 00030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 11 -> Node 0
SRAT: PXM 0 -> APIC 12 -> Node 0
SRAT: PXM 0 -> APIC 13 -> Node 0
SRAT: PXM 0 -> APIC 14 -> Node 0
SRAT: PXM 0 -> APIC 15 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 47 -> Node 1
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-880000000
SRAT: Node 1 PXM 1 880000000-1080000000
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000880000000
NODE_DATA [0000000000012040 - 000000000004603f]
bootmap [0000000000100000 - 000000000020ffff] pages 110
(8 early reservations) ==> bootmem [0000000000 - 0880000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002012024] TEXT DATA BSS ==> [0001000000 - 0002012024]
#3 [003737e000 - 0037fefd6c] RAMDISK ==> [003737e000 - 0037fefd6c]
#4 [0000077800 - 0000100000] BIOS reserved ==> [0000077800 - 0000100000]
#5 [0002013000 - 0002013450] BRK ==> [0002013000 - 0002013450]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000012030] ACPI SLIT ==> [0000012000 - 0000012030]
Bootmem setup node 1 0000000880000000-0000001080000000
NODE_DATA [0000000880000040 - 000000088003403f]
bootmap [0000000880035000 - 0000000880134fff] pages 100
(8 early reservations) ==> bootmem [0880000000 - 1080000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002012024] TEXT DATA BSS
#3 [003737e000 - 0037fefd6c] RAMDISK
#4 [0000077800 - 0000100000] BIOS reserved
#5 [0002013000 - 0002013450] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000012030] ACPI SLIT
found SMP MP-table at [ffff8800000fdc80] fdc80
Reserving 133MB of memory at 48MB for crashkernel (System RAM: 67584MB)
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800371fffff] on node 0
[ffffea0010800000-ffffea001dbfffff] PMD -> [ffff880038000000-ffff8800453fffff] on node 0
[ffffea001dc00000-ffffea0039bfffff] PMD -> [ffff880880200000-ffff88089c1fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x01080000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000008d
0: 0x00000100 -> 0x0007cc7e
0: 0x00100000 -> 0x00880000
1: 0x00880000 -> 0x01080000
On node 0 totalpages: 8375291
DMA zone: 56 pages used for memmap
DMA zone: 141 pages reserved
DMA zone: 3768 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 492726 pages, LIFO batch:31
Normal zone: 107520 pages used for memmap
Normal zone: 7756800 pages, LIFO batch:31
On node 1 totalpages: 8388608
Normal zone: 114688 pages used for memmap
Normal zone: 8273920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x2f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000008d000 - 000000000008e000
PM: Registered nosave memory: 000000000008e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007cc7e000 - 000000007ccd9000
PM: Registered nosave memory: 000000007ccd9000 - 000000007cdf1000
PM: Registered nosave memory: 000000007cdf1000 - 000000007da17000
PM: Registered nosave memory: 000000007da17000 - 000000007eb0e000
PM: Registered nosave memory: 000000007eb0e000 - 000000007f000000
PM: Registered nosave memory: 000000007f000000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94424 r8192 d24360 u131072
pcpu-alloc: s94424 r8192 d24360 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 16 17 18 19 20 21 22 23
pcpu-alloc: [1] 08 09 10 11 12 13 14 15 24 25 26 27 28 29 30 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 16527214
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 65901712k/69206016k available (5151k kernel code, 2150420k absent, 1153884k reserved, 7166k data, 1260k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1480
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 536870912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2900.011 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5800.02 BogoMIPS (lpj=2900011)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21015 entries in 83 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
IOMMU fbffe000: ver 1:0 cap d2078c106f0462 ecap f020fa
DMAR: DRHD base: 0x000000cfffc000 flags: 0x1
IOMMU cfffc000: ver 1:0 cap d2078c106f0462 ecap f020fa
DMAR: RMRR base: 0x0000007cc97000 end: 0x0000007ccbbfff
DMAR: RHSA base: 0x000000fbffe000 proximity domain: 0x1
DMAR: RHSA base: 0x000000cfffc000 proximity domain: 0x0
DMAR: No ATSR found
IOAPIC id 3 under DRHD base 0xfbffe000
IOAPIC id 0 under DRHD base 0xcfffc000
IOAPIC id 2 under DRHD base 0xcfffc000
HPET id 0 under DRHD base 0xcfffc000
Your BIOS has requested that x2apic be disabled.
This will leave your machine vulnerable to irq-injection attacks.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Setting APIC routing to cluster x2apic
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok.
Booting Node 0, Processors #16 #17 #18 #19 #20 #21 #22 #23 Ok.
Booting Node 1, Processors #24 #25 #26 #27 #28 #29 #30 #31 Ok.
Brought up 32 CPUs
Total of 32 processors activated (185587.04 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 7cdf1000 (12738560 bytes)
PM: Registering ACPI NVS region at 7eb0e000 (5185536 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load - [PRAD] OemId [PRADID] OemTableId [PRADTID]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x9fff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xcfffffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:05.4: reg 10: [mem 0xcfc0b000-0xcfc0bfff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xcfc0a000-0xcfc0a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10: [mem 0xcfc09000-0xcfc0900f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xcfc07000-0xcfc073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xcfc00000-0xcfc03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xcfc06000-0xcfc063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x9070-0x9077]
pci 0000:00:1f.2: reg 14: [io 0x9060-0x9063]
pci 0000:00:1f.2: reg 18: [io 0x9050-0x9057]
pci 0000:00:1f.2: reg 1c: [io 0x9040-0x9043]
pci 0000:00:1f.2: reg 20: [io 0x9020-0x903f]
pci 0000:00:1f.2: reg 24: [mem 0xcfc05000-0xcfc057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xcfc04000-0xcfc040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x9000-0x901f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xcf960000-0xcf97ffff]
pci 0000:02:00.0: reg 18: [io 0x8060-0x807f]
pci 0000:02:00.0: reg 1c: [mem 0xcfa8c000-0xcfa8ffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.1: reg 10: [mem 0xcf940000-0xcf95ffff]
pci 0000:02:00.1: reg 18: [io 0x8040-0x805f]
pci 0000:02:00.1: reg 1c: [mem 0xcfa88000-0xcfa8bfff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.1: reg 190: [mem 0xcfa00000-0xcfa03fff]
pci 0000:02:00.2: reg 10: [mem 0xcf920000-0xcf93ffff]
pci 0000:02:00.2: reg 18: [io 0x8020-0x803f]
pci 0000:02:00.2: reg 1c: [mem 0xcfa84000-0xcfa87fff]
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.2: reg 184: [mem 0xcf9e0000-0xcf9e3fff]
pci 0000:02:00.2: reg 190: [mem 0xcf9c0000-0xcf9c3fff]
pci 0000:02:00.3: reg 10: [mem 0xcf900000-0xcf91ffff]
pci 0000:02:00.3: reg 18: [io 0x8000-0x801f]
pci 0000:02:00.3: reg 1c: [mem 0xcfa80000-0xcfa83fff]
pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:00.3: PME# disabled
pci 0000:02:00.3: reg 184: [mem 0xcf9a0000-0xcf9a3fff]
pci 0000:02:00.3: reg 190: [mem 0xcf980000-0xcf983fff]
pci 0000:00:01.1: PCI bridge to [bus 02-03]
pci 0000:00:01.1: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.1: bridge window [mem 0xcf900000-0xcfafffff]
pci 0000:00:01.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.2: PCI bridge to [bus 06-06]
pci 0000:00:03.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xcf800000-0xcf803fff 64bit pref]
pci 0000:07:00.0: reg 18: [mem 0xcf400000-0xcf7fffff 64bit pref]
pci 0000:07:00.0: reg 20: [io 0x7000-0x70ff]
pci 0000:07:00.0: reg 164: [mem 0xcf000000-0xcf003fff 64bit pref]
pci 0000:07:00.3: reg 10: [mem 0xcf804000-0xcf804fff]
pci 0000:07:00.3: reg 20: [io 0x7100-0x711f]
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:07:00.3: PME# disabled
pci 0000:00:11.0: PCI bridge to [bus 07-07]
pci 0000:00:11.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:11.0: bridge window [mem 0xcf400000-0xcf8fffff]
pci 0000:00:11.0: bridge window [mem 0xcf000000-0xcf0fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 09-0a]
pci 0000:00:1c.7: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.7: bridge window [mem 0xcfb00000-0xcfbfffff]
pci 0000:00:1c.7: bridge window [mem 0xce000000-0xceffffff 64bit pref]
pci 0000:0a:00.0: reg 10: [mem 0xce000000-0xceffffff pref]
pci 0000:0a:00.0: reg 14: [mem 0xcfb00000-0xcfb1ffff]
pci 0000:0a:00.0: reg 18: [io 0x6000-0x607f]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:09:00.0: bridge window [io 0x6000-0x6fff]
pci 0000:09:00.0: bridge window [mem 0xcfb00000-0xcfbfffff]
pci 0000:09:00.0: bridge window [mem 0xce000000-0xceffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xcfffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
pci_bus 0000:7f: on NUMA node 0 (pxm 0)
pci0000:7f: Requesting ACPI _OSC control (0x1d)
pci0000:7f: ACPI _OSC control (0x1d) granted
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
pci_root PNP0A08:01: host bridge window [io 0xa000-0xffff]
pci_root PNP0A08:01: host bridge window [mem 0xd0000000-0xfbffffff]
pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
pci 0000:80:00.0: PME# disabled
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PME# disabled
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: PME# disabled
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: PME# disabled
pci 0000:80:05.4: reg 10: [mem 0xfbf00000-0xfbf00fff]
pci 0000:80:00.0: PCI bridge to [bus 81-81]
pci 0000:80:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:01.0: PCI bridge to [bus 82-82]
pci 0000:80:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:02.0: PCI bridge to [bus 83-83]
pci 0000:80:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:80: on NUMA node 1 (pxm 1)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
pci0000:80: Requesting ACPI _OSC control (0x1d)
pci0000:80: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
pci_bus 0000:ff: on NUMA node 1 (pxm 1)
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0a:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 74 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 75 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 76 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 77 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 78 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 74, 75, 76, 77, 78, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 74 for MSI
hpet: hpet3 irq 75 for MSI
hpet: hpet4 irq 76 for MSI
hpet: hpet5 irq 77 for MSI
hpet: hpet6 irq 78 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfeafffff]
pnp 00:01: [mem 0xfeb00000-0xfebfffff]
pnp 00:01: [mem 0xfed00400-0xfed3ffff]
pnp 00:01: [mem 0xfed45000-0xfedfffff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0x00000400-0x000004ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xcfffc000-0xcfffdfff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0290-0x029f]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x02f8-0x02ff]
pnp 00:0a: [irq 3]
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x0ca2]
pnp 00:0b: [io 0x0ca3]
pnp 00:0b: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0c: [io 0x0400-0x0453]
pnp 00:0c: [io 0x0458-0x047f]
pnp 00:0c: [io 0x1180-0x119f]
pnp 00:0c: [io 0x0500-0x057f]
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfec00000-0xfecfffff]
pnp 00:0c: [mem 0xfed08000-0xfed08fff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: [io 0x0454-0x0457]
pnp 00:0d: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0e: [mem 0xfed00000-0xfed003ff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:10: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:12: [mem 0xfbffe000-0xfbffffff]
pnp 00:12: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:13: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 20 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:01: [mem 0x00000400-0x000004ff] could not be reserved
system 00:02: [mem 0xcfffc000-0xcfffdfff] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:0c: [io 0x0400-0x0453] has been reserved
system 00:0c: [io 0x0458-0x047f] has been reserved
system 00:0c: [io 0x1180-0x119f] has been reserved
system 00:0c: [io 0x0500-0x057f] has been reserved
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0c: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [io 0x0454-0x0457] has been reserved
system 00:12: [mem 0xfbffe000-0xfbffffff] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.1: reg 190: [mem 0xcfa00000-0xcfa03fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.2: reg 184: [mem 0xcf9e0000-0xcf9e3fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.1: reg 190: [mem 0xcfa00000-0xcfa03fff]
pci 0000:02:00.2: reg 190: [mem 0xcf9c0000-0xcf9c3fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.1: reg 190: [mem 0xcfa00000-0xcfa03fff]
pci 0000:02:00.2: reg 184: [mem 0xcf9e0000-0xcf9e3fff]
pci 0000:02:00.3: reg 184: [mem 0xcf9a0000-0xcf9a3fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.1: reg 190: [mem 0xcfa00000-0xcfa03fff]
pci 0000:02:00.2: reg 184: [mem 0xcf9e0000-0xcf9e3fff]
pci 0000:02:00.2: reg 190: [mem 0xcf9c0000-0xcf9c3fff]
pci 0000:02:00.3: reg 190: [mem 0xcf980000-0xcf983fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.1: reg 190: [mem 0xcfa00000-0xcfa03fff]
pci 0000:02:00.2: reg 184: [mem 0xcf9e0000-0xcf9e3fff]
pci 0000:02:00.2: reg 190: [mem 0xcf9c0000-0xcf9c3fff]
pci 0000:02:00.3: reg 184: [mem 0xcf9a0000-0xcf9a3fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: reg 184: [mem 0xcfa60000-0xcfa63fff]
pci 0000:02:00.0: BAR 7: assigned [mem 0xcf980000-0xcf99ffff]
pci 0000:02:00.0: BAR 7: set to [mem 0xcf980000-0xcf99ffff] (PCI address [0xcf980000-0xcf99ffff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.0: reg 190: [mem 0xcfa40000-0xcfa43fff]
pci 0000:02:00.0: BAR 10: assigned [mem 0xcf9a0000-0xcf9bffff]
pci 0000:02:00.0: BAR 10: set to [mem 0xcf9a0000-0xcf9bffff] (PCI address [0xcf9a0000-0xcf9bffff]
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.1: reg 184: [mem 0xcfa20000-0xcfa23fff]
pci 0000:02:00.1: BAR 7: assigned [mem 0xcf9c0000-0xcf9dffff]
pci 0000:02:00.1: BAR 7: set to [mem 0xcf9c0000-0xcf9dffff] (PCI address [0xcf9c0000-0xcf9dffff]
pci 0000:02:00.1: reg 190: [mem 0xcfa00000-0xcfa03fff]
pci 0000:02:00.1: reg 190: [mem 0xcfa00000-0xcfa03fff]
pci 0000:02:00.1: BAR 10: assigned [mem 0xcf9e0000-0xcf9fffff]
pci 0000:02:00.1: BAR 10: set to [mem 0xcf9e0000-0xcf9fffff] (PCI address [0xcf9e0000-0xcf9fffff]
pci 0000:02:00.2: reg 184: [mem 0xcf9e0000-0xcf9e3fff]
pci 0000:02:00.2: reg 184: [mem 0xcf9e0000-0xcf9e3fff]
pci 0000:02:00.2: BAR 7: assigned [mem 0xcfa00000-0xcfa1ffff]
pci 0000:02:00.2: BAR 7: set to [mem 0xcfa00000-0xcfa1ffff] (PCI address [0xcfa00000-0xcfa1ffff]
pci 0000:02:00.2: reg 190: [mem 0xcf9c0000-0xcf9c3fff]
pci 0000:02:00.2: reg 190: [mem 0xcf9c0000-0xcf9c3fff]
pci 0000:02:00.2: BAR 10: assigned [mem 0xcfa20000-0xcfa3ffff]
pci 0000:02:00.2: BAR 10: set to [mem 0xcfa20000-0xcfa3ffff] (PCI address [0xcfa20000-0xcfa3ffff]
pci 0000:02:00.3: reg 184: [mem 0xcf9a0000-0xcf9a3fff]
pci 0000:02:00.3: reg 184: [mem 0xcf9a0000-0xcf9a3fff]
pci 0000:02:00.3: BAR 7: assigned [mem 0xcfa40000-0xcfa5ffff]
pci 0000:02:00.3: BAR 7: set to [mem 0xcfa40000-0xcfa5ffff] (PCI address [0xcfa40000-0xcfa5ffff]
pci 0000:02:00.3: reg 190: [mem 0xcf980000-0xcf983fff]
pci 0000:02:00.3: reg 190: [mem 0xcf980000-0xcf983fff]
pci 0000:02:00.3: BAR 10: assigned [mem 0xcfa60000-0xcfa7ffff]
pci 0000:02:00.3: BAR 10: set to [mem 0xcfa60000-0xcfa7ffff] (PCI address [0xcfa60000-0xcfa7ffff]
pci 0000:00:01.1: PCI bridge to [bus 02-03]
pci 0000:00:01.1: PCI bridge to [bus 02-03]
pci 0000:00:01.1: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.1: bridge window [mem 0xcf900000-0xcfafffff]
pci 0000:00:01.1: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem disabled]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:03.2: PCI bridge to [bus 06-06]
pci 0000:00:03.2: PCI bridge to [bus 06-06]
pci 0000:00:03.2: bridge window [io disabled]
pci 0000:00:03.2: bridge window [mem disabled]
pci 0000:00:03.2: bridge window [mem pref disabled]
pci 0000:07:00.0: reg 164: [mem 0xcf000000-0xcf003fff 64bit pref]
pci 0000:07:00.0: reg 164: [mem 0xcf000000-0xcf003fff 64bit pref]
pci 0000:07:00.0: reg 164: [mem 0xcf000000-0xcf003fff 64bit pref]
pci 0000:07:00.0: BAR 7: assigned [mem 0xcf000000-0xcf07bfff 64bit pref]
pci 0000:07:00.0: BAR 7: set to [mem 0xcf000000-0xcf07bfff 64bit pref] (PCI address [0xcf000000-0xcf07bfff]
pci 0000:00:11.0: PCI bridge to [bus 07-07]
pci 0000:00:11.0: PCI bridge to [bus 07-07]
pci 0000:00:11.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:11.0: bridge window [mem 0xcf400000-0xcf8fffff]
pci 0000:00:11.0: bridge window [mem 0xcf000000-0xcf0fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:09:00.0: bridge window [io 0x6000-0x6fff]
pci 0000:09:00.0: bridge window [mem 0xcfb00000-0xcfbfffff]
pci 0000:09:00.0: bridge window [mem 0xce000000-0xceffffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 09-0a]
pci 0000:00:1c.7: PCI bridge to [bus 09-0a]
pci 0000:00:1c.7: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.7: bridge window [mem 0xcfb00000-0xcfbfffff]
pci 0000:00:1c.7: bridge window [mem 0xce000000-0xceffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:80:00.0: PCI bridge to [bus 81-81]
pci 0000:80:00.0: PCI bridge to [bus 81-81]
pci 0000:80:00.0: bridge window [io disabled]
pci 0000:80:00.0: bridge window [mem disabled]
pci 0000:80:00.0: bridge window [mem pref disabled]
pci 0000:80:01.0: PCI bridge to [bus 82-82]
pci 0000:80:01.0: PCI bridge to [bus 82-82]
pci 0000:80:01.0: bridge window [io disabled]
pci 0000:80:01.0: bridge window [mem disabled]
pci 0000:80:01.0: bridge window [mem pref disabled]
pci 0000:80:02.0: PCI bridge to [bus 83-83]
pci 0000:80:02.0: PCI bridge to [bus 83-83]
pci 0000:80:02.0: bridge window [io disabled]
pci 0000:80:02.0: bridge window [mem disabled]
pci 0000:80:02.0: bridge window [mem pref disabled]
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: bridge window [io disabled]
pci 0000:80:03.0: bridge window [mem disabled]
pci 0000:80:03.0: bridge window [mem pref disabled]
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 32 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 40 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.2: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:09:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
alloc irq_desc for 48 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
pci 0000:80:00.0: setting latency timer to 64
alloc irq_desc for 50 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:01.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
pci 0000:80:01.0: setting latency timer to 64
alloc irq_desc for 56 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:02.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:80:02.0: setting latency timer to 64
alloc irq_desc for 64 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:03.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:80:03.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff]
pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xcf900000-0xcfafffff]
pci_bus 0000:07: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:07: resource 1 [mem 0xcf400000-0xcf8fffff]
pci_bus 0000:07: resource 2 [mem 0xcf000000-0xcf0fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:09: resource 1 [mem 0xcfb00000-0xcfbfffff]
pci_bus 0000:09: resource 2 [mem 0xce000000-0xceffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:0a: resource 1 [mem 0xcfb00000-0xcfbfffff]
pci_bus 0000:0a: resource 2 [mem 0xce000000-0xceffffff 64bit pref]
pci_bus 0000:0b: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0b: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0b: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0b: resource 7 [io 0x0d00-0x9fff]
pci_bus 0000:0b: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0b: resource 10 [mem 0x80000000-0xcfffffff]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff]
pci_bus 0000:80: resource 5 [mem 0xd0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:0a:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 12743k freed
DMAR: Unsupported device scope
audit: initializing netlink socket (disabled)
type=2000 audit(1379505558.825:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 7718219730662729
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 79 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.1: irq 80 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 81 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 82 for MSI/MSI-X
pcieport 0000:00:03.2: setting latency timer to 64
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.2: irq 83 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:11.0: irq 84 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 85 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 85 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 86 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.7: irq 86 for MSI/MSI-X
pcieport 0000:80:00.0: setting latency timer to 64
alloc irq_desc for 87 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:00.0: irq 87 for MSI/MSI-X
pcieport 0000:80:01.0: setting latency timer to 64
alloc irq_desc for 88 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:01.0: irq 88 for MSI/MSI-X
pcieport 0000:80:02.0: setting latency timer to 64
alloc irq_desc for 89 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:02.0: irq 89 for MSI/MSI-X
pcieport 0000:80:03.0: setting latency timer to 64
alloc irq_desc for 90 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:03.0: irq 90 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 17, io mem 0xcfc07000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-279.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xcfc06000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-279.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2013-09-18 11:59:20 UTC (1379505560)
Initalizing network drop monitor service
Freeing unused kernel memory: 1260k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 972k freed
Freeing unused kernel memory: 1732k freed
dracut: dracut-004-283.el6
udev: starting version 147
dracut: Starting plymouth daemon
ACPI: WMI: Mapper loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0-rh
isci 0000:07:00.0: driver configured for rev: 5 silicon
isci 0000:07:00.0: OEM parameter table found in OROM
isci 0000:07:00.0: [0]: invalid oem parameters detected, falling back to firmware
isci 0000:07:00.0: firmware: requesting isci/isci_firmware.bin
isci 0000:07:00.0: OEM SAS parameters (version: 1.0) loaded (firmware)
isci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
isci 0000:07:00.0: setting latency timer to 64
isci 0000:07:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi0 : isci
alloc irq_desc for 91 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
isci 0000:07:00.0: irq 91 for MSI/MSI-X
alloc irq_desc for 92 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
isci 0000:07:00.0: irq 92 for MSI/MSI-X
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
alloc irq_desc for 93 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 93 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xcfc05000 port 0xcfc05100 irq 93
ata2: SATA max UDMA/133 abar m2048@0xcfc05000 port 0xcfc05180 irq 93
ata3: SATA max UDMA/133 abar m2048@0xcfc05000 port 0xcfc05200 irq 93
ata4: SATA max UDMA/133 abar m2048@0xcfc05000 port 0xcfc05280 irq 93
ata5: SATA max UDMA/133 abar m2048@0xcfc05000 port 0xcfc05300 irq 93
ata6: SATA max UDMA/133 abar m2048@0xcfc05000 port 0xcfc05380 irq 93
usb 1-1: new high speed USB device number 2 using ehci_hcd
Refined TSC clocksource calibration: 2899.999 MHz.
Switching to clocksource tsc
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633F, AS01, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi: waiting for bus probes to complete ...
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new high speed USB device number 3 using ehci_hcd
usb 1-1.3: New USB device found, idVendor=046b, idProduct=ff01
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: Virtual Hub
usb 1-1.3: Manufacturer: American Megatrends Inc.
usb 1-1.3: SerialNumber: serial
usb 1-1.3: configuration #1 chosen from 1 choice
hub 1-1.3:1.0: USB hub found
hub 1-1.3:1.0: 5 ports detected
usb 2-1.1: new low speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=045e, idProduct=0039
usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1.1: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 2-1.1: Manufacturer: Microsoft
usb 2-1.1: configuration #1 chosen from 1 choice
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.1/input0
usb 2-1.2: new low speed USB device number 4 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=0a81, idProduct=0101
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Keyboard
usb 2-1.2: Manufacturer: CHESEN
usb 2-1.2: configuration #1 chosen from 1 choice
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.2/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input5
generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.2/input1
usb 1-1.3.1: new low speed USB device number 4 using ehci_hcd
usb 1-1.3.1: New USB device found, idVendor=046b, idProduct=ff10
usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3.1: Product: Virtual Keyboard and Mouse
usb 1-1.3.1: Manufacturer: American Megatrends Inc.
usb 1-1.3.1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input6
generic-usb 0003:046B:FF10.0004: input,hidraw3: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.3.1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input7
generic-usb 0003:046B:FF10.0005: input,hidraw4: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.3.1/input1
sas: phy-0:0 added to port-0:0, phy_mask:0x1 (5fcfffff00000001)
sas: phy-0:1 added to port-0:1, phy_mask:0x2 (5fcfffff00000002)
sas: DOING DISCOVERY on port 0, pid:797
sas: DONE DISCOVERY on port 0, pid:797, result:0
sas: DOING DISCOVERY on port 1, pid:797
sas: DONE DISCOVERY on port 1, pid:797, result:0
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
usb 1-1.3.2: new high speed USB device number 5 using ehci_hcd
usb 1-1.3.2: New USB device found, idVendor=046b, idProduct=ff20
usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3.2: Product: Virtual Cdrom Device
usb 1-1.3.2: Manufacturer: American Megatrends Inc.
usb 1-1.3.2: SerialNumber: AAAABBBBCCCC1
usb 1-1.3.2: configuration #1 chosen from 1 choice
ata7.00: ATA-8: ST9500620NS, SN03, max UDMA/133
ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:0:0: Direct-Access ATA ST9500620NS SN03 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
sas: ata8: end_device-0:1: dev error handler
usb 1-1.3.3: new high speed USB device number 6 using ehci_hcd
usb 1-1.3.3: New USB device found, idVendor=046b, idProduct=ff40
usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3.3: Product: Virtual Floppy Device
usb 1-1.3.3: Manufacturer: American Megatrends Inc.
usb 1-1.3.3: SerialNumber: AAAABBBBCCCC2
usb 1-1.3.3: configuration #1 chosen from 1 choice
usb 1-1.3.4: new high speed USB device number 7 using ehci_hcd
ata8.00: ATA-8: ST9500620NS, SN03, max UDMA/133
ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
usb 1-1.3.4: New USB device found, idVendor=046b, idProduct=ff31
usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3.4: Product: Virtual HardDisk Device
usb 1-1.3.4: Manufacturer: American Megatrends Inc.
usb 1-1.3.4: SerialNumber: AAAABBBBCCCC3
usb 1-1.3.4: configuration #1 chosen from 1 choice
scsi 0:0:1:0: Direct-Access ATA ST9500620NS SN03 PQ: 0 ANSI: 5
scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F AS01 PQ: 0 ANSI: 5
Initializing USB Mass Storage driver...
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: sda1 sda2 sda3
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda3
dracut: Loading SELinux policy
type=1404 audit(1379505563.604:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 250818 rules.
SELinux: 2048 avtab hash slots, 250818 rules.
SELinux: 9 users, 12 roles, 3761 types, 187 bools, 1 sens, 1024 cats
SELinux: 81 classes, 250818 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1379505563.975:3): policy loaded auid=4294967295 ses=4294967295
usb-storage: device scan complete
usb-storage: device scan complete
usb-storage: device scan complete
dracut:
scsi 7:0:0:0: CD-ROM AMI Virtual CDROM0 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:0: Direct-Access AMI Virtual Floppy0 1.00 PQ: 0 ANSI: 0 CCS
scsi 9:0:0:0: Direct-Access AMI Virtual HDISK0 1.00 PQ: 0 ANSI: 0 CCS
sr1: scsi-1 drive
sr 7:0:0:0: Attached scsi CD-ROM sr1
sd 9:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:0: [sdd] Attached SCSI removable disk
dracut: Switching root
udev: starting version 147
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
igb: Copyright (c) 2007-2011 Intel Corporation.
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
igb 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 94 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 94 for MSI/MSI-X
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 95 for MSI/MSI-X
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 96 for MSI/MSI-X
alloc irq_desc for 97 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 97 for MSI/MSI-X
alloc irq_desc for 98 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 98 for MSI/MSI-X
alloc irq_desc for 99 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 99 for MSI/MSI-X
alloc irq_desc for 100 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 100 for MSI/MSI-X
alloc irq_desc for 101 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 101 for MSI/MSI-X
alloc irq_desc for 102 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 102 for MSI/MSI-X
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:e0:18:12:02:30
igb 0000:02:00.0: eth0: PBA No: 104900-000
igb 0000:02:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 30 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: PCI INT B -> GSI 30 (level, low) -> IRQ 30
igb 0000:02:00.1: setting latency timer to 64
alloc irq_desc for 103 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 103 for MSI/MSI-X
alloc irq_desc for 104 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 104 for MSI/MSI-X
alloc irq_desc for 105 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 105 for MSI/MSI-X
alloc irq_desc for 106 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 106 for MSI/MSI-X
alloc irq_desc for 107 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 107 for MSI/MSI-X
alloc irq_desc for 108 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 108 for MSI/MSI-X
alloc irq_desc for 109 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 109 for MSI/MSI-X
alloc irq_desc for 110 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 110 for MSI/MSI-X
alloc irq_desc for 111 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 111 for MSI/MSI-X
igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:e0:18:12:02:31
igb 0000:02:00.1: eth1: PBA No: 104900-000
igb 0000:02:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: PCI INT C -> GSI 28 (level, low) -> IRQ 28
igb 0000:02:00.2: setting latency timer to 64
alloc irq_desc for 112 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 112 for MSI/MSI-X
alloc irq_desc for 113 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 113 for MSI/MSI-X
alloc irq_desc for 114 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 114 for MSI/MSI-X
alloc irq_desc for 115 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 115 for MSI/MSI-X
alloc irq_desc for 116 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 116 for MSI/MSI-X
alloc irq_desc for 117 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 117 for MSI/MSI-X
alloc irq_desc for 118 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 118 for MSI/MSI-X
alloc irq_desc for 119 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 119 for MSI/MSI-X
alloc irq_desc for 120 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.2: irq 120 for MSI/MSI-X
igb 0000:02:00.2: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.2: eth2: (PCIe:5.0Gb/s:Width x4) 00:e0:18:12:02:32
igb 0000:02:00.2: eth2: PBA No: 104900-000
igb 0000:02:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: PCI INT D -> GSI 29 (level, low) -> IRQ 29
igb 0000:02:00.3: setting latency timer to 64
alloc irq_desc for 121 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 121 for MSI/MSI-X
alloc irq_desc for 122 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 122 for MSI/MSI-X
alloc irq_desc for 123 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 123 for MSI/MSI-X
alloc irq_desc for 124 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 124 for MSI/MSI-X
alloc irq_desc for 125 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 125 for MSI/MSI-X
alloc irq_desc for 126 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 126 for MSI/MSI-X
alloc irq_desc for 127 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 127 for MSI/MSI-X
alloc irq_desc for 128 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 128 for MSI/MSI-X
alloc irq_desc for 129 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.3: irq 129 for MSI/MSI-X
igb 0000:02:00.3: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.3: eth3: (PCIe:5.0Gb/s:Width x4) 00:e0:18:12:02:33
igb 0000:02:00.3: eth3: PBA No: 104900-000
igb 0000:02:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sr 5:0:0:0: Attached scsi generic sg2 type 5
sr 7:0:0:0: Attached scsi generic sg3 type 5
sd 9:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: Attached scsi generic sg5 type 0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:07:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:07:00.3: Enabling SMBus device
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 130 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
snd_hda_intel 0000:00:1b.0: irq 130 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda-intel: no codecs found!
snd_hda_intel 0000:00:1b.0: PCI INT A disabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EDAC MC: Ver: 2.1.0 Jun 21 2012
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:7f:0e.0
EDAC MC1: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#1': DEV 0000:ff:0e.0
EDAC sbridge: Driver loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 8191992k swap on /dev/sda2. Priority:-1 extents:1 across:8191992k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth3: link is not ready
igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
eth3: no IPv6 routers present
usb 2-1.2: USB disconnect, device number 4
SELinux: 2048 avtab hash slots, 278017 rules.
SELinux: 2048 avtab hash slots, 278017 rules.
SELinux: 9 users, 12 roles, 3900 types, 205 bools, 1 sens, 1024 cats
SELinux: 81 classes, 278017 rules
SELinux: Context unconfined_u:unconfined_r:virtd_t:s0-s0:c0.c1023 became invalid (unmapped).
SELinux: Context system_u:unconfined_r:virtd_t:s0-s0:c0.c1023 became invalid (unmapped).
SELinux: Context unconfined_u:unconfined_r:qemu_t:s0-s0:c0.c1023 became invalid (unmapped).
SELinux: Context system_u:unconfined_r:qemu_t:s0-s0:c0.c1023 became invalid (unmapped).
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
Registering the id_resolver key type
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
FS-Cache: Netfs 'nfs' registered for caching
SELinux: initialized (dev 0:13, type nfs), uses genfs_contexts
SELinux: initialized (dev 0:14, type nfs4), uses genfs_contexts
SELinux: initialized (dev 0:15, type nfs4), uses genfs_contexts
SELinux: initialized (dev 0:16, type nfs4), uses genfs_contexts